Products 
  Quick Links
  Company Profile
  Global Network
  Major Projects
  Manufacturing Facilities
  Certified Builders
  Products
  Product Literature
  Request a Quotation
  Contact Us
  FAQs

 

  Products
  Basic Parameters
  Applications of PEB
  Glossary
  Panels
Choose your language here!
Home > Pre Engineered Buildings > Products  > Standard Frames

 Standard Frames

Zamil Steel pre-engineered buildings are custom-designed to meet your exact requirements.  The most common primary framing systems are shown below.  Practically any frame geometry is possible.  Consult a Zamil Steel representative for your specific requirements.

Clear Span (CS)

Single Slope (SS)

Multi-Span “1” (MS-1)

Multi-Span “2” (MS-2)

Multi-Span “3” (MS-3)

Multi-Gable (MG)

Roof System (RS)

Lean-To (LT)

The above main frame configurations are the most commonly used frames.  At Zamil Steel we can produce other non standard main frames, of almost any configuration, if required.

Clear Span (CS)

Building without interior columns
- maximum practical width = 80 m

Single Slope (SS)

Building without interior columns
- maximum practical width = 50 m

Multi-Span “1” (MS-1)

Building with one interior column
- maximum practical module width = 70 m

Multi-Span “2” (MS-2)

Building with two interior columns
- maximum practical module width = 70 m

Multi-Span “3” (MS-3)

Building with three interior columns
- maximum practical module width = 70 m

Multi-Gable (MG)

Maximum practical module width = 80 m

Roof System (RS)

Maximum practical width = 30 m

Lean-To (LT)

Maximum practical width = 24 m

  Search  |  Sitemap

 
   Divisions:  Pre Engineered Buildings | Structural Steel | Towers and Galvanizing  
    What's New? | Major Projects | Products | Product Brochures | Certified Builders
Best at 800x600     Copyright (C) 2004, Zamil Steel  | Contact Zamil Steel  |  Terms of Use