Products
- Product Literature
- Pre-Engineered Buildings (PEB)
- Applications of PEB
- Primary Framing
- Secondary Framing
- Roof and Wall Panels
- Insulated Panels
- Steel Joists
- Steel Decks
- HAMBRO Floor System
Network
PEB Awareness
PEBs are made of steel, a highly homogeneous material & can work equally well in stress reversal conditions of either tension or compression
Primary Framing
Zamil Steel pre-engineered buildings are custom-designed to meet your exact requirements. The most common Primary Framing systems are shown below. Practically any frame geometry is possible. Consult a Zamil Steel representative for your specific requirements.
Primary Build-Up Members: Minimum yield strength is 34.5 kN/ cm2
At Zamil Steel we can produce other non-standard main frames, of almost any configuration, if required.
High grade steel plate conforming to ASTM A 572M Grade 345. Factory painted with a minimum of 35 microns (DFT) of corrosion protection primer.
Frame Types:
Building without interior columns - maximum practical width = 90 m
Arched Clear-Span - maximum practical width = 90 m
Maximum practical width = 24 m
Maximum practical module width = 80 m
Building with one interior column - maximum practical module width = 70 m
More multi-spans are possible (AMS-2, AMS-3,...)
Building with one interior column - maximum practical module width = 70 m
Building with two interior columns - maximum practical module width = 70 m
Building with three interior columns - maximum practical module width = 70 m
Maximum practical width = 30 m
Building without interior columns - maximum practical width = 50 m
Most recent news
- Monday, December 3, 2018
Zamil Steel awarded contract to build a large number of poultry broiler houses in Oman - Tuesday, August 7, 2018
ZSCC wins SAR 13.9 Million contract for Riyadh Rapid Bus Transit System project - Monday, July 30, 2018
ZSCC wins SAR 26.8 Million contract to supply for Riyadh Rapid Bus Transit System project
